How To Install Rgh On Xbox 360

Charland Abligaverins · Tuesday, March 22, 2022

SETTING Upward YOUR NEW JTAG OR RGH XBOX 360
Just got your easily on that sweet RGH or JTAG Xbox of yours? Perfect!
Feeling overwhelmed with all the updating, connecting, more updating and even more setting upwards? This tutorial will teach you lot how to gear up-upwardly your console from scratch, all the way from the beginning to pretty much everything.

:help: :help:

Everything yous do here is basically MANDATORY FOR RGH/JTAG USERS!

Lets get started!

"The first step to get anywhere is deciding you're not willing to stay where y'all are"

~Unknown~

THE FIRST Boot & SETTING Upward FSD (FREESTYLE DASH) :thumbup:
So you've turned on your Xbox, and you're taken to the master dashboard, something that looks like this:

Moving on - this dashboard is the old bones boring 1. If you're happy with it, stick with it. Merely if yous're looking at some cool stuff, let's move on, shall we?

And then, to starting time information technology off, you demand a USB Stick. Any USB stick. Has to exist at least 2GB though. Plug it into your Xbox 360, into any USB Port, and press on the Right Bumper (RB) until you lot get to the final page on the basic dashboard. Become alee and Select 'System Settings' and navigate to 'Storage'. Now highlight your USB device, and press A on it and configure the USB. Later a few minutes, your UBB volition be configured to your Xbox. Yous may now unplug your USB.

Caput to your PC, hopefully Running Windows (Tutorial will use Windows), and run Horizon (Installation .exe fastened below - named 'Horizon Setup.exe' or from right hither â‡¢ or download it from here). Horizon is a very useful tool used for many things moving frontward in the RGH and JTAG community. Simply for now, open it up, and plug in your USB. It should recognise your USB, and you should get a screen that looks something similar this:

I'yard assuming you did become something like that â‡ˆ, if y'all didn't, try re-configuring your USB in the Xbox and Plugging it in again on your PC with Horizon open up. Now, download XEXMenu (also attached down below or right here â‡¢ or yous could just become it from here). Excerpt the .nix file by correct-clicking on the downloaded file, and clicking on excerpt. Once excerpt is consummate, you should run across a file named something like 'C0DE99990F586' and a agglomeration of stuff after that in a folder named XEXMenu. Drag and drop that file into Horizon with the USB plugged in, and a popup within Horizon will come up. On the meridian right corner, click on 'Salvage to Device' and select your USB (Wink Drive). At present wait till another popup comes saying that the process has completed. One time done, simply pull out your USB.

Nosotros're going to go back to your Xbox, and nosotros are going to plug in the USB. Navigate your way to 'Organisation Settings', and so to 'Storage' and press 'Y' when you're highlighting your USB device. Move everything on the USB stick to your consoles HDD (Hd) or Retentivity Unit. Once done, we no longer require the USB - for now. Go back to the main basic Dashboard, and get to games. Run the game demo named 'XEXMenu 1.two'.

Back on your PC, download FreeStyleDash (a.k.a FSD) (not attached below just you lot can become it from here). While you wait for the download to complete, plug back in the USB that was configured to your Xbox and format information technology to your PC. Now yous should be able to use it as a normal USB. Then one time the download completes, extract and move the folder named FreeStyleDash3 to your USB, looking something like this:

Go back to your Xbox, plug the USB in, and if you are following this properly, y'all should have XEXMenu opened upwardly. It should automatically open up your USB - merely f information technology doesn't just printing on the Right Bumper (RB) until you become to it. Navigate and highlight the FSD (FreeStyleDash3) binder, and Copy it by pressing on the 'Y' and so 'A'. Press 'X' and select your HDD (press 'A' on it) and paste the folder in that location by pressing 'Y' and selecting 'Paste'. Let it terminate. In one case its done, remove your USB - and navigate in your HDD to inside the FreeStyleDash3 Binder, and run 'default.exe' by highlighting it and pressing 'A'.
Wala! Your new custom Dashboard! Eat some Ice-Cream! :ice:

SETTING Upwardly CONSOLE TO Boot DIRECTLY TO NEW DASHBOARD (DASHLAUNCH)

Okay - so you've installed FSD, but whenever you plough on your Xbox, it boots into the basic sometime BORING dashboard! Lets fix that. Open up up XEXMenu and get that USB. Head to your PC and Plug it in. Download Dashlaunch (Attached down there â†´ or only get it from here â†' or download from here). Extract and put it onto your USB. Go dorsum to your Xbox, plug it in, and in XEXMenu, practise the same process of Copying and Pasting the folder of Dashlaunch to your HDD (If you didn't read how to, it the paragraph right higher up this 1 â‡ˆ). Later copying completes, remove the USB, and open up the DashLaunch folder in the Xbox. Open up the other folder within named 'Installer' and run the file named 'default.xex' inside. If you go a pop up windows asking to update, become alee and update.
Now, press 'A' on 'Paths' and go down to default. Press 'A' on it, and and then scan to your FSD (FreeStyleDash3) folder and press 'A' on the 'default.xex' file, similar this:

Now printing 'A' on Paths again, and the carte du jour will close. Printing 'A' on Network and press 'A' on pingpatch to enable it. Next, just make sure liveblock is enabled, because you lot don't want a banned Xbox:banned: , at present do you lot? Now one last thing - close the Network menu by pressing 'A' on Network, and go downwards to Configurator and press 'A'. Enable ftpserv. Don't screw with anything else.
Printing RB (Correct Bumper) and yous should get a screen like this:

Highlight your main HDD or MU (Memory Unit), in my case, HDD and printing 'X' on information technology, then press 'A' on it. At present press 'B' to exit Dashlaunch - you should now load upwards into FSD!
Thats it!

INSTALLING AND RUNNING GAMES WITHOUT A Deejay
Then, now you've got an xbox that's got Dashlaunch, that has FSD installed - and so lets get those Xbox DVDS hanging around on your Game Lists!
Kick up your console, and guess what - it booted straight to FSD! YAY! Navigate to DVD Excerpt, which will expect something like this:

Select information technology, and your DVD bulldoze will come out. Put in your game, and click on Okay. Your DVD drive will get dorsum inside. Now just wait a chip, Information on your game will be extracted. Choose your destination path and click on 'Outset Excerpt' Now wait until completed.
Once complete, navigate back to the 'Settings' menu in FSD, downward into 'Content', and downwardly to 'Manage Game Paths'. Press 'Y' and click 'A' on modify path. Navigate to the path that you lot extracted your game, and open the folder upwardly and then that you can see the 'default.xex' file inside. Printing 'Y' to select the directory. Now on Browse Depth, increase it to the number of directories yous entered, so in my example below, four.

At present simply press 'X'. Get back to the dashboard menu, and wait for about thirty seconds. Now just go to games, and your game is there!
Congrats! Take a drink! :cheers:

GETTING THE Weather condition ON YOUR Panel
Alrighty! Some done, more to go! Tired? Better experience for me - I typed all this for YOU! :respect:
If you haven't noticed yet, the pictures above testify the weather, considering my panel has the weather application set-up on information technology! Lets show you how to exercise that!
Then beginning off, become to Settings, and go to Full general Settings. Now go to Conditions Settings. In the textbox abreast or under ApiKey, enter i of the following ApiKeys:

1) y9s7fy2gm8bjbmbrdahdums6
two) 7upfgf44xs3t9xeh8wcxcztz

It should look something like this:

Now enter your Zip lawmaking or City proper noun in the respective box, and select your metropolis in the box underneath (The large gray box in the screenshot higher up). Once done so, press 'B' and go to General Settings, and enable 'Show Weather on Startup'. You might even want to enable 'Display Temperature in Celsius'.
Re-Kicking your Console.
Your dashboard volition now have the weather like below:

Now check out your temperature! :sick:

UPDATING TO THE LATEST DASHBOARD Not-CORONA & CORONA

This part of the tutorial will cover updating to the latest dashboard on any other console other than a Corona. If y'all don't know your console type, just run DashLaunch and expect at the bottom right corner.
So to begin, you lot'll need your Panel'southward CPU fundamental. Go it by running DashLaunch, and pressing RB until you get to 'Miscellaneous', and press 'A' on 'System Info' Your CPU key will be written on the meridian left of the window. Write that downwardly somewhere. Go to your PC, and plug in your USB.

Download and excerpt 'Simple 360 NAND Flasher (fastened below, or download from here â†' or just get it from here). Copy the unabridged extracted binder to your USB and plug the USB into your Xbox. On your console (im assuming you are running FSD) navigate to File Managing director, open up up your usb, and browse to inside the directory of 'Simple 360 NAND Flasher', and run the 'default.xex' file within.
You volition want to dump your nand to a file, so press 'X'. Await for the process to consummate. Once complete, press any push button to get out. Pull out your USB, and head over to your PC. Run xeBuild, which is the file named 'xeBuild GUI 2.0.exe' (as well attached below, or download from here â†' , or from hither). Plug in your USB. In xeBuild, beside Source, click on 'Open up' and browse for the file named something like 'flashdmp.bin' in the Simple 360 NAND Flasher Binder. Then click on 'Save' Underneath, and select the same folder.

Now, enter the CPU Primal we extracted earlier in the textbox abreast CPU Key. Under the identify where you enter your CPU Primal, Click on the drop down carte du jour under Kernel Version and select the latest version (currently 16547).

Now for Brand SURE Y'all CHECKMARK 'DISABLE FCRT.bin CHECK'.

Click on 'Generate Hacked Paradigm' on the bottom of the window. Wait for the process to complete. There will be a popup, click on 'Yes'.
Now remove your USB and become back to your Xbox. Plug it back in, and rn Uncomplicated 360 NAND Flasher again. This fourth dimension however, press 'A' to flash your NAND. Look for the process to complete. Your console will shutdown. Wait with your console off for 40 seconds, and turn information technology dorsum on.
If when turning on, the Xbox Logo comes up, y'all're adept to go!

GETTING THE AVATAR UPDATE (IF YOUR AVATAR IS NOT SHOWING Upwardly)
So your lovely avatar is all greyed out! Lets fix that!
Considering y'all're on the latest dashboard (which you have to be), the avatar update is one like shooting fish in a barrel matter. On your PC - go to the Xbox Update website (or click here) and scroll downwardly to 'Re-create to a USB Wink Bulldoze', and download the Update File. Plug in your USB, and excerpt the binder inside and motility the

Entire

$Sytemupdate Binder onto the ROOT of your USB Drive. Once complete, rename the folder to $$ystemupdate and remove your USB from the PC. Run on your Xbox console, and wait for FSD to completely load. One time so, printing the Xbox Guide button, printing RB all the style to the finish, and select System Settings.
Once Organization Settings is open, press 'B' until you are on the Basic original Dashboard. Now Plug in your USB, and a popup should come up upward maxim to update, so UPDATE!

PREPARING FILE TRANSFER PROTOCOL (FTP)
Lets acquire how to control and transfer files on our Xbox without a USB!

First off, y'all demand a PC connected to the Internet. And then y'all need a Xbox connected to preferably the same net network. If you don't know how to connect your Xbox to the internet, Printing the Guide button on the Xbox controller, then RB until you become to the end. Select 'Organization Settings' and information technology the same drill as e'er from there, except for the function that you lot will become an error in the verifying connectedness to Xbox Alive, so dont freak out no me over here. So back on the PC, nosotros need a FTP Client. I prefer GODspeed, every bit it is based completely to friction match your xbox needs, just y'all can use any other customer such every bit FileZilla besides. Then open up up GODspeed or FileZilla (download from beneath or here â†' or from here or here), and follow your corresponding tutorial below:

FOR GODspeed â†´

Okay, so become GODspeed open on your PC, and Turn on your Xbox. Once your xbox is on and booted up in FSD, take annotation of the number on the bottom left corner (if you are withal in the default skin). It should be something like '192.168.0.12'. If you dont see information technology, endeavor pressing the Right Joystick inward, then you hear the 'click'. Now the number should come in the bottom left. If it says N/A, y'all haven't connected your Xbox to the internet correctly. Back on GODspeed, you will encounter the primary window divided into ii sections, i on the right, for your Xbox, and ane on the left, for the directories of your PC. Click on 'New Connectedness' and in the popup that comes up, enter the details as you wish, except where it says Address, enter the number yous noted downwardly from the bottom left corner of your FSD homepage. The port should nevertheless be 21, unless you screwed around with it, which we didn't here. Now one last step, When you are filling out your console's information inside, make sure you click on the 'Change' push button and enter 'xbox' (without the '') for both username and countersign. Then simply click Okay and yous're good to go! At present simply double-click on your console to connect to it! To transfer files.ect, look at the commands on the bottom of the window. Your setup should take looked something like this:

FOR FileZilla â†´

Okay, and then get FileZilla open on your PC, and Turn on your Xbox. One time your xbox is on and booted up in FSD, have note of the number on the bottom left corner (if you lot are still in the default peel). It should be something like '192.168.0.12'. If you dont see it, endeavor pressing the Right Joystick inward, so yous hear the 'click'. At present the number should come in the lesser left. If it says North/A, you haven't connected your Xbox to the internet correctly. Back on FileZilla, you will run across the master window divided into several sections, mainly consisting of one on the right, for your Xbox, and one on the left, for the directories of your PC. On the top of the window, there is a textbox abreast 'Host'. In at that place, enter the number we noted down earlier from FSD. Next, just put 'xbox' (without the '') for username and password, and get out port equally 21. Click on connect, and you're upward and going! Your setup should accept looked something like this:

You probably felt like all this went over your head!

Relish YOUR NEW CONSOLE SETUP!

All the files used in this tutorial so far tin can be downloaded as a bundle, including all the source files and pictures.ect from here :down: